Restoring Factory Default Settings Using Manual Initialization 33 Parameter Descriptions 35 Parameter Group 0-** Operation and Display 35 0-0* Basic Settings 35 0-1* Set-up Operations 37 0-2* LCP Display 41 0-3* LCP Custom Readout 49 0-4* LCP Keypad 54 0-5* Copy/Save 56 0-6* Password 57 0-7* Clock Settings 59 Parameter Group 1-** Load and Motor 62
The range value of the pressure switch must be set at 10 bar, the differential at 1 bar. The bell must be connected to terminals 1 and 4. Example 3 The pressure in a start air reservoir must be regulated with a compressor controlled by a KPS pressure switch so that it lies between 30 and 36 bar. Choose a KPS 45 (range 4 - 40 bar).
danfoss vfd control wiring and parameter settings this video-program copy parameter motor details parameter settings Frequency
by setting the neutral zone disc (40) at 2.5. Because the contact dierential is 0.1 bar, the make and break dierential pressures for the switch are: Make dierential pressure for contacts 1 - 4 = 0.5 bar + 0.1 bar = 0.6 bar. Break dierential pressure for contacts 1 - 4 = 0.5 bar (= set value p). 1 - 2 = 0.6 bar - 0.25 bar = 0.35 bar.
Step 1. With the help of a wrench and the backing wrench with the adjustable screw, the technicians are challenged to remove the hex cap located on the base of the TXV valve. Step 2. To increase the superheat, technicians are allowed to turn it clockwise with the help of a refrigerant wrench. Step 3.
. 5 414 282 355 53 108 106 305
cara setting pressure switch danfoss
